产品
PCB 发射器 - 5-Button - UHF (12-86-5005)
The 12-86-5005 transmitter PCB used in this product is a small low cost, high specification bare printed circuit board paging transmitter measuring 60mm by 31mm and only 6mm deep with the battery fitted.
It can be supplied with between 1 & 5 switches fitted and an aerial attached. An LED can also be mounted if required.
This product has been tested and type approved as a bare printed circuit board allowing integration into other products without further type approval testing being required.
The 12-86-5005 is an extremely small, low cost UHF POCSAG paging transmitter that is ideal for developers and integrators wishing to develop their own low power solution.
The transmitter can have between 1 & 5 switches fitted, in addition to an aerial and a single LED (all optional).
Powered by a standard CR2032 coin cell, it will operate for more than 1000 transmissions under normal conditions before the battery needs replacing.
Using a POCSAG receiver the 12-86-5005 can be used for any general remote control application, such as turning on lights, disabling alarms or switching machinery on or off.
12-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once the operating frequency has been set the 12-86-5000 messages can be changed using configuration software.
Although the 12-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.
| 频率范围 | 440-470MHz - UHF |
| 频率选择 | 用户可配置的 |
| 电力供应 | 3V CR2032按钮电池 |
| 电池寿命 | Approx 1000 transmissions Approx 10 years standby |
| 电力消耗 | 待机:100 na 传输:45马 |
| 传输能量 | 30mW |
| 信道间隔 | 25千赫 |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±4.5 khz |
| 发射占空比 | Up to 20%; Maximum 30 seconds on time |
| 波特率 | 512 |
| 消息格式 | POCSAG |
| Configuration Application | 12-86 配置工具 (Available for free download from 下载 page) |
| 编程电缆 | 12-47-0000 (Board header to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable 12-48-0000 (Board header to mini USB) |
| 串行端口 | 9600 , N, 8, 1; RS232 |
| 离散输入 | 1, 2, 3, 4 or 5 contact options |
| 射频连接器 | 天线可选 |
| Environmental Protection | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| 工作温度 | -10ºC to +55ºC (+14ºF to +131ºF) |
| 重量 | 14g |
| 外壳尺寸 | N/A |
| 外壳材料 | N/A |
| 颜色 | N/A |
| 类型的审批 | 通过4769.1:2000 + Amendment 1:2002 (RF) En 300-224-2 （rf） FCC CFR47 Part 90 （RF） En 301 489-2 v2.1.0 (EMC) EN 60950-1:2006 (Safety) |
The 12-86-5005 is an extremely small, low cost UHF POCSAG paging transmitter that is ideal for developers and integrators wishing to develop their own low power solution.
The transmitter can have between 1 & 5 switches fitted, in addition to an aerial and a single LED (all optional).
Powered by a standard CR2032 coin cell, it will operate for more than 1000 transmissions under normal conditions before the battery needs replacing.
Using a POCSAG receiver the 12-86-5005 can be used for any general remote control application, such as turning on lights, disabling alarms or switching machinery on or off.
12-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once the operating frequency has been set the 12-86-5000 messages can be changed using configuration software.
Although the 12-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.
| 频率范围 | 440-470MHz - UHF |
| 频率选择 | 用户可配置的 |
| 电力供应 | 3V CR2032按钮电池 |
| 电池寿命 | Approx 1000 transmissions Approx 10 years standby |
| 电力消耗 | 待机:100 na 传输:45马 |
| 传输能量 | 30mW |
| 信道间隔 | 25千赫 |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±4.5 khz |
| 发射占空比 | Up to 20%; Maximum 30 seconds on time |
| 波特率 | 512 |
| 消息格式 | POCSAG |
| Configuration Application | 12-86 配置工具 (Available for free download from 下载 page) |
| 编程电缆 | 12-47-0000 (Board header to DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable 12-48-0000 (Board header to mini USB) |
| 串行端口 | 9600 , N, 8, 1; RS232 |
| 离散输入 | 1, 2, 3, 4 or 5 contact options |
| 射频连接器 | 天线可选 |
| Environmental Protection | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| 工作温度 | -10ºC to +55ºC (+14ºF to +131ºF) |
| 重量 | 14g |
| 外壳尺寸 | N/A |
| 外壳材料 | N/A |
| 颜色 | N/A |
| 类型的审批 | 通过4769.1:2000 + Amendment 1:2002 (RF) En 300-224-2 （rf） FCC CFR47 Part 90 （RF） En 301 489-2 v2.1.0 (EMC) EN 60950-1:2006 (Safety) |
